Mount a towel bar about 48 inches above the floor, a towel ring at 50 to 52 inches, a robe hook at 65 to 70 inches, and a toilet paper holder about 26 inches high and 8 to 12 inches in front of the toilet bowl. Measure every height from the finished floor to the center of the piece, and fix it into a stud or a proper anchor rather than trusting the plastic plugs in the box.
This guide covers towel bar, toilet paper holder and robe hook heights one piece at a time, the heights an accessible bathroom needs, and how to fix solid brass so it stays on the wall. In September 2026 we read 135 bathroom accessory listings at five workshops, and not one of them said how high to mount the piece.
What are the standard heights for bathroom accessories?
Most bathroom accessories go at a small set of standard heights, all measured from the finished floor to the center of the piece. The table below gathers them, with the accessible figures alongside.
| Piece | Height from the floor | Where on the wall | Height source |
|---|---|---|---|
| Towel bar | 48 in to the center | Near the shower or tub | Knobs.co |
| Towel ring | 50 to 52 in to the center | Beside the sink | Knobs.co |
| Robe hook | 65 to 70 in | Back of the door or by the shower | Knobs.co |
| Towel hook | 60 to 66 in | Where a hand towel is needed | Knobs.co |
| Toilet paper holder | 26 in to the center | 8 to 12 in in front of the toilet bowl | NKBA |
| Toilet paper holder, accessible | 15 to 48 in to the outlet | 7 to 9 in in front of the toilet | NKBA, US Access Board |
| Grab bar | 33 to 36 in to the top | Beside and behind the toilet, in the shower | US Access Board |
Treat these as starting points and adjust for the people using the room. A tall household may want hooks at the top of the range, and a child’s bathroom lower.
How high should a towel bar or towel ring be?
Mount a towel bar with its center 48 inches above the finished floor, and a towel ring a little higher, at 50 to 52 inches. Put the bar where you step out of the shower and the ring within reach of the sink.
Knobs.co, a hardware seller, gives the standard as a towel bar mounted with its center 48 inches above the finished floor and a towel ring mounted with its center 50 to 52 inches above the floor, with every measurement taken from the finished floor to the center of the fixture.
Choose the length before you drill. Solid brass towel bars at the workshops we list come in many lengths, from 9 inches at Zayian to 59 inches at CopperKesh, and a double bar like the one below comes in 16, 24 and 32 inches. Hold a folded bath towel against the wall to see how wide the bar needs to be.
Where should a toilet paper holder go?
Center a toilet paper holder about 26 inches above the floor and 8 to 12 inches in front of the edge of the toilet bowl. In an accessible bathroom the rule is tighter: 7 to 9 inches in front of the toilet, with the outlet between 15 and 48 inches high.
The NKBA’s Bath Planning Guidelines recommend that the toilet paper holder should be located 8″ to 12″ in front of the edge of the toilet bowl, centered at 26″ above the floor. For accessible bathrooms, the US Access Board puts the dispenser’s centerline 7 inches to 9 inches beyond the leading edge of the water closet, at 15 to 48 inches above the floor measured to the outlet.
Check the projection too. Rod & Rails lists one of its wall-mounted holders at a projection of 3.1 inches, and says it mounts with concealed screws for a clean, minimalist look. If the wall beside the toilet is tiled marble you would rather not drill, a freestanding holder avoids the question: Rod & Rails sells one as a no-drill solution, perfect for luxury bathrooms with marble or tiled walls.
How high should a robe hook be?
Mount a robe hook at 65 to 70 inches above the floor, within a wider accepted range of 60 to 70 inches. Smaller towel hooks for hand towels usually go lower, at 60 to 66 inches.
Knobs.co says most installation guides place a robe hook at 65 to 70 inches above the floor, and that towel hooks are typically set at 60 to 66 inches. For a double hook, it measures to the upper hook and places that in the 60 to 70 inch range, so the lower hook falls a few inches below.
Height is not the only check for a hook on the back of a door. Make sure the robe hangs clear of the floor, and that the hook does not hit the wall or a towel bar when the door swings open.
What heights does an accessible bathroom need?
In an accessible bathroom, grab bars go 33 to 36 inches above the floor to the top of the bar, and the toilet paper dispenser sits 7 to 9 inches in front of the toilet with its outlet 15 to 48 inches high. Hooks and shelves must be within reach, which puts at least one shelf 40 to 48 inches above the floor.
The US Access Board’s guide to the ADA Standards sets grab bars at 33 inches to 36 inches high measured to the top of the gripping surface, and keeps the toilet paper dispenser at least 1 1/2 inches below a grab bar and 12 inches above one, so a hand can still grip the bar. These rules apply to public buildings and to homes required to be accessible, but they are a sound plan for any bathroom meant to work as people age.
Plan the wall before it is closed. The NKBA guidelines recommend reinforcing the walls at construction to allow for installation of grab bars to support a static load of 250 lbs, even if the bars come later.
How do you fix brass bathroom accessories to the wall?
Screw into a wall stud wherever you can, and where there is no stud, use metal toggle anchors rather than the cone-shaped plastic plugs that often come in the box. Solid brass is heavy, and a towel bar gets pulled on every day.
This Old House says the simplest safe way to attach any fixture is to drive the mounting screws directly into wall studs, and that plastic anchors pull out too easily, while metal toggle anchors can withstand 40 pounds of pull when embedded in 1/2-inch drywall. Moen’s own towel bar instructions separate the two cases: the anchors are for drywall, and if installing product into a stud, use the wood screws only. On tile, Knobs.co warns that over-tightening cracks tile grout and can strip drywall anchor threads, so tighten until snug and stop.
What the listings say. In September 2026 we read every bathroom accessory listing at Zayian, CopperKesh, Rod & Rails, Kinycraft and Artihand: 135 in all, counted once where two stores list the same piece, made up of 52 toilet paper holders, 42 robe and towel hooks, 25 towel bars and 16 towel rings. Not one says how high to mount the piece, and none mentions studs or drywall. Many give a length and a projection, and some say screws are included, but only one says what they go into: a Zayian towel ring tells buyers to drill into the wall, insert the wall plugs, and screw the mounting bracket securely. Another Zayian ring states that it can support a weight of up to 10 pounds. So plan the heights yourself, and buy better anchors than the plugs in the box.
Can you get a discount on brass bathroom accessories?
Yes, at three of the workshops we list. In September 2026 Rod & Rails and CopperKesh each had a working code for 10% off their whole store, and Zayian was offering free worldwide express shipping.
We put every code through a real checkout before listing it. The Rod & Rails code took 10% off a single $280 tub filler with nothing else in the basket, so there was no minimum to reach first, and Rod & Rails sells most of the hooks, holders and bars pictured in this guide. Buying the towel bar, ring, hook and holder together in one order is where a sitewide code does the most. Codes expire, so check the date each one was last tested on the Rod & Rails, CopperKesh and Zayian store pages, and read how we verify codes.
So, where should each bathroom accessory go?
Towel bar at 48 inches, towel ring at 50 to 52, robe hook at 65 to 70, and toilet paper holder at 26 inches and 8 to 12 inches in front of the bowl, all measured to the center. Mark the spots with painter’s tape, check them with the people who use the room, and fix every piece into a stud or a metal anchor.
Browse brass towel bars and hooks with the codes we have checked. If you are still choosing a finish, read unlacquered vs lacquered brass, and once the pieces are up, how to clean unlacquered brass.
About the authors. JGD Editors are the people who check every code on JustGetDeal in a real checkout before it goes on the site, and who read the workshops’ own listings for the facts in these guides.
Some links on JustGetDeal can earn us a commission. The price you pay is the same. Read the affiliate disclosure.
Get new tested codes by email
One email on Friday: the codes that passed our checkout test that week, the ones we pulled, and new guides. Quiet week, short email.
