Copper Vessel Sinks discount codes
A vessel sits on the counter, so it changes the height of everything under it and the tap above it. Get those two right, then pick the bowl.
No codes live for Copper Vessel Sinks right now
We check twice a day and put one up the moment it works, so it is worth looking back. The wider sinks and basins page sometimes has one when this narrower list does not.
See all sinks and basinsCopper Vessel Sinks questions
How tall should the vanity be under a vessel sink?
Comfortable rim height for most people is thirty two to thirty six inches from the floor. Measure the bowl, subtract it from the height you want, and buy the cabinet to that. A standard vanity plus a vessel is usually too tall.
Do I need a special tap?
Yes. A normal basin tap will not clear the rim, so you need a tall vessel tap or a wall mounted spout. If it is going into the wall, the plumbing has to be roughed in before tiling, which is why this decision cannot wait.
Does a vessel sink need an overflow?
Many copper vessels come without one, and that changes which drain fits. Ask the workshop before you buy the drain, because a pop up meant for an overflow basin will not seal properly in one without.
Get the height right before anything else
A vessel sink sits on the counter rather than in it, so it adds its own height to whatever it stands on. Comfortable rim height for most people is between thirty two and thirty six inches from the floor, which usually means the vanity underneath has to be shorter than a standard one. Measure the bowl, subtract, and only then choose the cabinet.
The tap is part of the decision
A normal basin tap will not clear the rim. You need either a tall vessel tap or a wall mounted spout, and if you are going into the wall the plumbing has to be roughed in before the tiling goes on. Deciding this late is the single most expensive mistake in a vessel sink bathroom.
Check the spout reach as well as the height. Water should land near the middle of the bowl. Too short and it runs down the inside wall, too long and it hits the far side and splashes back at you.
Drains and daily use
Most copper and brass vessels take a standard pop up or a grid drain, but some come with no overflow, which changes which drain fits. Ask the workshop rather than assuming.
The join where the bowl meets the counter collects splashes and toothpaste. A bead of clear silicone, kept thin, saves a lot of wiping and does not show. Around a hand basin the patina moves quickly, because soap is mildly alkaline and hands are constant, so expect a vessel to darken faster than a kitchen sink.